subject
Engineering, 12.03.2020 18:54 garrettrhoad

Consider an infinitely thin flat plate of chord c at an angle of attack α in a supersonic flow. The pressure distribution

can be approximated as follows:

i) Upper surface: Cp constant at -0.8 from the leading edge to 60% chord, then increasing linearly to +0.1 at the trailing edge.

ii) Lower surface: Cp constant at –0.4 from the leading edge to 60% chord, then increasing linearly to +0.1 at the trailing edge.

Estimate the lift coefficient and the pitching moment coefficient about the leading edge due to lift.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
question
Engineering, 06.07.2019 03:20
1kg of water contained in a piston-cylinder assembly undergoes two processes in series from an initial state where the pressure is 3.0 bar and the temperature is 150°c process 1-2: the water is compressed isothermally to a volume of 0.25 m^3 with 120 kj of work being done to the system. process 2-3: the water is heated at constant volume to a final pressure of 10 bar. a. find the change in internal energy for the system. b. calculate the amount of heat transferred, in kj. c. sketch both processes on a t-v diagram. (196.33 kj/kg, 76.33 kj)
Answers: 1
You know the right answer?
Consider an infinitely thin flat plate of chord c at an angle of attack α in a supersonic flow. The...
Questions
question
Mathematics, 08.12.2020 02:30
question
Mathematics, 08.12.2020 02:30
Questions on the website: 13722361