subject
Engineering, 30.03.2020 19:21 mandy9386

2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and exposed to a solar radiation flux of sun q′′ =750W/m2 on the other side. The exposed surface has an absorptivity of 0.87 α sun = for solar radiation; that is, 87% of the sun’s energy are absorbed whereas the other 13% are reflected. Assuming that the energy absorbed by the panel is dissipated by both natural convection and radiation (with a surrounding temperature of Tsur=300K, and a surface emissivity of εpanel = 0.85) into the surrounding quiescent air at atmospheric pressure and T[infinity] = 300 K, determine the surface temperature of the panel at steady state.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and expo...
Questions
Questions on the website: 13722360