Engineering, 30.03.2020 21:05 shygrl05

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately, smaller versions of these devises are available for weekend warriors who want to play with their chain saws. Let us model the illustrated tongs as a planar mechanism that carries a log of weight N. Given the following dimensions: 35 mm 10 mm 40 mm 230 mm 85 mm 45 mm 10 mm 35 mm 345 mm determine the force in N and moment in Nm that our worker exerts on the tongs. Also determine the pinching force magnitude in N that the tongs exert on the log; i. e. determine the horizontal force that the tong's teeth exert on the log. Assume the point is centered between the tong's teeth. Matlab input: a

Answers: 2

Show answers

Answers

Answer from: sophoyak

Complete Question

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately, smaller versions of these devises are available for weekend warriors who want to play with their chain saws. Let us model the illustrated tongs as a planar mechanism that carries a log of weight 210 N. Given the following dimensions: 35 mm 10 mm 40 mm 230 mm 85 mm 45 mm 10 mm 35 mm 345 mm determine the force in N and moment in Nm that our worker exerts on the tongs. Also determine the pinching force magnitude in N that the tongs exert on the log; i.e. determine the horizontal force that the tong's teeth exert on the log. Assume the point E is centered between the tong's teeth.

The diagram for this question is shown on the first uploaded image

The force P is P= 210 N

and the moment M is $M = -48.3N \cdot m$

The horizontal force that the tong teeth exerts is F_T =89.67N

Explanation:

First let denote the dimension to corresponding to the diagram

$a=35mm , b= 10mm, c= 40mm, d= 230mm, e= 85mm,f= 45mm,\\g= 10mm,h=35mm,i=345mm.$

Next looking at the diagram let us consider the vertical direction

At equilibrium

$\sum F_{vertical} =0$

This mean that

P+ W = 0

Since they are acting in opposite direction the equation becomes

P - W = 0

=> P= W

=> P= 210 N

At Equilibrium Moment about F gives

$\sum M_f = 0$

=> F_T * (e +f + g+ h+ i) - F_T * (e+ f+g+ h+i) - W *d -M =0

=> M = -W *d

=> M = -210 * 0.230

=> $M = -48.3N \cdot m$

Here F_T is the horizontal force that the tong teeth exerts

Now let consider the part BAF of the system as shown on the second uploaded image

Now the angle $\theta$ is mathematically given as

$tan \theta = \frac{g+h}{a}$

=> $\theta = arctan \frac{g+h}{a}$

$= arctan (\frac{10+35}{35} )$

=52.125^o

Now at equilibrium the moment about A is

$\sum M_A = 0$

=> $P * (c+d) +M + F_{BC} cos \theta *f+F_{BC}sin\theta *(a+b) =0$

$210 * (0.040 + 0.230)-48.3+F_{BC} cos (52.125^o)*0.045+ F_{BC}sin(52.125^o)$ * (0.035 +0.010) =0

=> $10.29 +F_{BC} (0.02763+0.03552) =0$

=> $F_{BC} =\frac{10.29}{0.06315}$

=> $F_{BC} = - 162.925 N$

Looking at the forces acting on the teeth as shown on the third uploaded image

At Equilibrium the moment about D is

$\sum M_D = 0$

=> $\frac{W}{2} *d - F_T *(i+h) -F_{BC} cos \theta *h -F_{BC} sin \theta * (b+c) =0$

=> $\frac{210}{2} * 0.230 -F_T (0.345 +0.035) - (-162.925)cos(52.125^o) *0.035\\-(-162.925)sin(52.125^o)(0.010 +0.040) =0$

=> 34.081 = F_T(0.345 +0.035)

=> F_T =89.67N

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately,

Answer from: Quest

answer: eco and eco system

explanation:

Answer from: Quest

how is this a question? in order for me to answer it i have to understand the question

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

Answer

You know the right answer?

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately,...

Questions