Engineering, 15.04.2020 19:05 emmaschloegl21x

Air is compressed steadily by a 5 kW compressor from 100 kPa and 17?C to

600 kPa and 167?C at a rate of 1.6 kg/min. During this process, some heat transfer takes

place between the compressor and the surrounding medium at 17C.

Determine

a. the rate of heat transfer from the compressor.

b. the rate of change in entropy in the control volume during this process.

c. the difference in the entropy rate between inflow and outflow.

d. the change in entropy of the surroundings during this process.

e. the change in entropy of the world during this process. ( 0.815 W/K)

f. Sketch the process on a T-s diagram that includes the constant pressure curves

through the initial and final states.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Air is compressed steadily by a 5 kW compressor from 100 kPa and 17?C to

600 kPa and 16...

Questions