Engineering, 20.04.2020 19:28 silverns

The kinetics of an enzyme were analyzed in the absence of inhibitors, as well as in the presence of Inhibitor A and Inhibitor B. Using the given data below, construct or calculate the following (Make sure to label graphs with appropriate axes and equations, and circle final answers):
[S] mM No Inhibitor V0 (mmol/min) Inhibitor A V1 (mmol/min) Inhibitor B V2 (mmol/min)
3 3.90 2.40 1.29
6 6.00 3.60 2.40
12 8.40 5.10 3.90
24 10.8 6.60 6.30
36 12.0 7.20 8.55
a. Write out the Michaelis-Menten and Lineweaver-Burke equations
b. Plot all of the data on one plot as Michaelis-Menten saturation curves
c. Plot all of the data on one plot in the Lineweaver-Burk format
d. Define Km and Vmax

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

You know the right answer?

The kinetics of an enzyme were analyzed in the absence of inhibitors, as well as in the presence of...

Questions