Engineering, 05.05.2020 06:41 miraclewhipppp

#include using namespace std; class InventoryTag { public: InventoryTag(); int getQuantityRemaining() const; void addInventory(int numItems); private: int quantityRemaining; }; InventoryTag::InventoryTag() { quantityRemaining = 0; } int InventoryTag::getQuantityRemaining( ) const { return quantityRemaining; } void InventoryTag::addInventory(int numItems) { if (numItems > 10) { quantityRemaining = quantityRemaining + numItems; } } int main() { InventoryTag redSweater; int sweaterShipment; int sweaterInventoryBefore; sweaterInventoryBefore = redSweater. getQuantityRemaining(); cin >> sweaterShipment; cout << "Beginning tests." << endl; // FIXME add unit test for addInventory /* Your solution goes here */ cout << "Tests complete." << endl; return 0; }

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?

Answers: 2

Answer

You know the right answer?

#include using namespace std; class InventoryTag { public: InventoryTag(); int getQuantityRemaining(...

Questions