Engineering, 06.05.2020 04:44 harleymichaelbp74jsq
A structural component in the shape of a flat plate 23.5 mm thick is to be fabricated from a metal alloy for which the yield strength and plane strain fracture toughness values are 535 MPa and 38.4 MPa-m1/2, respectively. For this particular geometry, the value of Y is 1.7. Assuming a design stress of 0.5 times the yield strength, calculate the critical length of a surface flaw.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
A structural component in the shape of a flat plate 23.5 mm thick is to be fabricated from a metal a...
Questions
Mathematics, 21.10.2021 01:40
Mathematics, 21.10.2021 01:40
Mathematics, 21.10.2021 01:40
Mathematics, 21.10.2021 01:40
Engineering, 21.10.2021 01:40
Mathematics, 21.10.2021 01:40
