Engineering, 12.08.2020 05:01 24chrim
In a particular application involving airflow over a heated surface, the boundary layer temperature distribution may be approximated as
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Engineering, 06.07.2019 04:30
What does stp and ntp stands for in temperature measurement?
Answers: 3
In a particular application involving airflow over a heated surface, the boundary layer temperature...
Mathematics, 08.03.2021 08:00
Mathematics, 08.03.2021 08:00
Chemistry, 08.03.2021 08:00
English, 08.03.2021 08:00
Biology, 08.03.2021 08:00
Mathematics, 08.03.2021 08:00
Mathematics, 08.03.2021 08:00
Physics, 08.03.2021 08:00
Mathematics, 08.03.2021 08:00