Engineering, 20.09.2020 09:01 ylimekasos311

KIWIUYRU SRIUS TO SUIVE Pruura. Trey USC every pusDIVIC TOUCc Wreate the things that they imagine. But engineering is not just inventing. It's a systematic
practice for solving problems. That means that when an engineer encounters a
problem, he or she has a system in place for breaking down the problem and trying
different solutions. We also use the word "engineering” to describe the buildingor
technology that engineers produce.
Different types of engineers solve different kinds of problems. A mechanical
engineer might design a rollercoaster that is fun and safe using knowledge of
physics and mechanics, while a civil engineer might design a system for creating

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

You know the right answer?

KIWIUYRU SRIUS TO SUIVE Pruura. Trey USC every pusDIVIC TOUCc Wreate the things that they imagine....

Questions