subject
Engineering, 19.11.2020 18:00 224509

Milk enters a heat exchanger at 158C and at a rate of 2000 kg/h. The heating medium is the latent heat provide by
steam. The outlet temperature of the product is 958C and the
specific heat of the product is 3.9 kJ/(kg 8C). If the latent
heat provided by the steam is 2600 kJ/kg, estimate the flow
rate of steam needed to accomplish product heating.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
question
Engineering, 04.07.2019 19:20
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
question
Engineering, 06.07.2019 05:30
Design a quick return four bar mechanism that will have time ratio of tr 1: 1.25 . the output link should scan 60° angle for a full crank rotation . the length of output link is 5.0 em 1)-find the length of the other links and draw the mechanism .(write down your steps) 2)-does the mechanism satisfy the grashof's condition. 3)-find the max and min transmission angles over the range of motion using graphical technique
Answers: 2
You know the right answer?
Milk enters a heat exchanger at 158C and at a rate of 2000 kg/h. The heating medium is the latent h...
Questions
question
Mathematics, 30.01.2020 15:50
Questions on the website: 13722360