Answers: 3
Another question on Engineering
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
Engineering, 06.07.2019 05:30
Design a quick return four bar mechanism that will have time ratio of tr 1: 1.25 . the output link should scan 60° angle for a full crank rotation . the length of output link is 5.0 em 1)-find the length of the other links and draw the mechanism .(write down your steps) 2)-does the mechanism satisfy the grashof's condition. 3)-find the max and min transmission angles over the range of motion using graphical technique
Answers: 2
You know the right answer?
When do you need to apply for program completion and review?...
Questions
Mathematics, 16.08.2020 14:01
