Air enters an adiabatic turbine at 900 K and 1000 kPa. The air exits at 400 K and 100 kPa with a velocity of 30 m/s. Kinetic and potential energy changes are negligible. If the power delivered by the turbine is 1000 kW. Required:
a. Find the mass flow rate.
b. Find the diameter of the duct at the exit.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above