Engineering, 14.12.2020 20:30 tressasill
Why are communication (verbal, written and drawing) skills so important to have as an engineer?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Why are communication (verbal, written and drawing) skills so important to have as an engineer?...
Questions
Mathematics, 26.01.2021 05:00
Mathematics, 26.01.2021 05:00
Spanish, 26.01.2021 05:00
Biology, 26.01.2021 05:00
Mathematics, 26.01.2021 05:00
Biology, 26.01.2021 05:00
Arts, 26.01.2021 05:00
Mathematics, 26.01.2021 05:00
Mathematics, 26.01.2021 05:00
Computers and Technology, 26.01.2021 05:00
Mathematics, 26.01.2021 05:00
