subject
Engineering, 18.12.2020 03:20 dayanawhite64

Pls help me A population of ducks lives in an area that floods many times each year. Some of the ducks are better at finding food on dry land, while other ducks are better at finding food in wet, muddy areas. Eventually, the land around the lake permanently changes from dry soil to wet, marshy mud.

How will this change to the land most likely affect the duck population?

The population will remain stable because the ducks will not be affected by this kind of change.
The population will eventually balance out so that there are equal numbers of both types of ducks.
The population will evolve so that most ducks survive no matter how they find food.
The population will evolve so that most ducks are better at finding food in wet, muddy areas.

Study the image.

Point 1 is beneath water moving toward land. Point 2 is next to an erupting vocano. Point 3 is beneath Earth apostrophe s crust moving toward the water. Point 4 is the same layer as Point 1 moving down below Point 3.

At which point is subduction occurring?

1
2
3
4

The diagram shows a shell fossil.

Which type of fossil is shown?

mold
cast
trace
imprint

In which era did mammals emerge?

Cenozoic
Mesozoic
Paleozoic
Precambrian

The picture shows two different species of mammals that use wings to glide among tree tops. However, scientists theorize that these mammals are not closely related.

Which best explains why these two animals look so similar if they are not closely related?

They have analogous structures that developed for different functions.
They have homologous structures that developed for different functions.
They live in similar environments and have analogous structures adapted to them.
They live in similar environments and have homologous structures adapted to them.

thanks if you know these

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160ยฐf. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
Pls help me A population of ducks lives in an area that floods many times each year. Some of the du...
Questions
question
Mathematics, 07.02.2021 22:20
question
History, 07.02.2021 22:20
question
Mathematics, 07.02.2021 22:20
question
Mathematics, 07.02.2021 22:20
question
Computers and Technology, 07.02.2021 22:20
Questions on the website: 13722359