Engineering, 21.01.2021 22:20 ahmedeldyame

ASAE 1060 Steel wire (1 mm diameter) is coated with copper to form a composite with a diameter of 2mm. Use the following properties for parts a, b, and c of question 2: The elastic modulus of copper is 110 GPa The yield stress of the copper is 140 MPa The coefficient of thermal expansion of the copper is 17 times 10^-6/degree C. The elastic modulus of steel is 205 GPa The yield stress of the steel is 280 MPa The coefficient of thermal expansion of the copper is 10 times 10^-6/degree C Determine: a. The elastic modulus of the composite b. The maximum force that the composite will carry before either material yields c. The coefficient of thermal expansion of the composite material.

Answers: 2

Show answers

Answers

Answer from: preciousweeks11

a) $E_{m}$ = 133.75 Gpa

b) Fnet = 560 N

c) thermal expansion of the composite material = 14.31 $10^{-6 }$ / °C

Explanation:

Solution:

a) Elastic Modulus of the composite:

Area of steel wire = $\frac{\pi }{4}$ x ( $0.001^{2}$ ) = 0.8 x $10^{-6}$ $m^{2}$

Area of Copper wire = $\frac{\pi }{4}$ x ( $0.002^{2}$ ) - 0.8 x $10^{-6}$ $m^{2}$

Area of Copper wire = 2.4 x $10^{-6}$ $m^{2}$

Young's Modulus of Composite mixture:

$E_{m}$ = $F_{st}$ $E_{st}$ + $F_{Cu}$ $E_{Cu}$ Equation 1

here,

$F_{st}$ = Stress in Steel

$F_{Cu}$ = Stress in Copper.

We know that,

F = P/A

F is inversely proportional to Area, so if area is large, stress will less and vice versa. So, Take

Ratio for area of steel = $\frac{0.8. 10^{-6} }{(0.8 + 2.4) .10^{-6} }$

Ratio for area of steel = $\frac{0.8}{3.2 }$ = 0.25

Similarly, for Copper,

Ratio for area of copper = $\frac{2.4. 10^{-6} }{(0.8 + 2.4) .10^{-6} }$

Ratio for area of copper = $\frac{2.4 }{3.2}$ = 0.75

Put these values in equation 1:

$E_{m}$ = $F_{st}$ $E_{st}$ + $F_{Cu}$ $E_{Cu}$

$E_{m}$ = (0.25) $E_{st}$ + (0.75) $E_{Cu}$

We are given that,

$E_{st}$ = 205 Gpa

$E_{Cu}$ = 110 Gpa

So,

$E_{m}$ = (0.25) (205 Gpa) + (0.75) (110 GPa)

$E_{m}$ = 51.25GPa + 82.5 Gpa

Hence, the Elastic Modulus of the composite will be:

$E_{m}$ = 133.75 Gpa

b) maximum force:

Fnet = Fst + Fcu

We know that F = (Yield Stress x Area)

F = fst x Ast + fcu x Acu

And we are given that,

Yield stress of Steel = 280 Mpa

Yield stress of Copper = 140 Mpa

And,

Ast = 0.8 x $10^{-6}$ $m^{2}$

Acu = 2.4 x $10^{-6}$ $m^{2}$

Just plugging in the values, we get:

F = (280 Mpa) (0.8 x $10^{-6}$ $m^{2}$ ) + (140 Mpa) (2.4 x $10^{-6}$ $m^{2}$ )

F = 224 + 336

Fnet = 560 N ( because Mpa = $10^{6}$ N/ $m^{2}$ )

So, it means the composite will carry the maximum force of 560N

c) Coefficient of Thermal Expansion:

Strain on both material is same upon loading so,

(ΔL/L)st = (ΔL/L)cu

by thermal expansion equation:

( $\alpha .$ ΔT + $\frac{F}{A}$ $. \frac{1}{Est}$ ) = $\alpha .$ ΔT + $\frac{F}{A}$ $. \frac{1}{Ecu}$ )

Where $\alpha$ = Coefficient of Thermal expansion

Here, fst = -fcu = F

and ΔT = 1°

So,

Plugging in the values, we get.

( 10 x $10^{-6}$ x (1) + $\frac{F}{0.8.10^{-6} } . \frac{1}{205 . 10^{9} }$ ) = ( 17 x $10^{-6}$ x (1) + $\frac{-F}{2.4.10^{-6} } . \frac{1}{110 . 10^{9} }$ )

Solving for F, we get:

F = 0.71 N

Here,

fst = F = 0.71 N (Tension on Heating)

fcu = -F = 0.71 N ( Compression on Heating )

So, the combined thermal expansion of the composite material will be:

(ΔL/L)cu = ( 17 x $10^{-6}$ x (1°) + $\frac{-0.71}{2.4.10^{-6} } . \frac{1}{110 . 10^{9} }$ )

(ΔL/L)cu = ( 17 x $10^{-6}$ x (1°) - 2.69 x $10^{-6}$

combined thermal expansion of the composite material = 14.31 $10^{-6 }$ / °C

Answer from: Quest

jesus loves you

explanation:

Answer from: Quest

the equation above shows how temperature f, measured in degrees fahrenheit, relates to a temperature c, measured in degrees celsius. based on the equation, which of the following must be true?

a temperature increase of 1 degree fahrenheit is equivalent to a temperature increase of

degree celsius.

a temperature increase of 1 degree celsius is equivalent to a temperature increase of 1.8 degrees fahrenheit.

a temperature increase of

degree fahrenheit is equivalent to a temperature increase of 1 degree celsius.

a) i only

b) ii only

c) iii only

d) i and ii only

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

ASAE 1060 Steel wire (1 mm diameter) is coated with copper to form a composite with a diameter of 2m...

Questions