subject
Engineering, 19.02.2021 18:10 xandreaii

A 5Ω resistance is in a series circuit with a 0.20 H pure inductance and a 40.0nF pure capacitance. The combination is placed across a 30 V, 1780 Hz power supply. Find i. The current in the circuit; (4 marks) ii. The phase angle between source voltage and current; (1 mark) iii. The power loss in the circuit; (1 mark) iv. And the voltmeter reading across each element of the circuit.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 06.07.2019 04:10
Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump
Answers: 1
question
Engineering, 06.07.2019 05:10
An ideal vapour-compression heat pump cycle provides a heating rate of 12btu/s. the working fluid, refrigerant 134a, enters the compressor as a saturated vapor at 40 psi and exits the condenser as a saturated liquid at 160 psi. determine (a) the mass flow rate of the working fluid in lb/min (b) the compressor power in btu/min. (c) the coefficient of performance.
Answers: 2
You know the right answer?
A 5Ω resistance is in a series circuit with a 0.20 H pure inductance and a 40.0nF pure capacitance....
Questions
Questions on the website: 13722363