A pump draws a solution, specific gravity= 1.84 flow on storage tank through a 3-in schedule 40 steel
pipe. The efficiency of the pump is 60%. The velocity
is the suction line in 1mls. The pump discharges through
2-in schedule to 40 pipe to an overhead tank. The end
of discharge pipe is 15m above the level of
the solution in the feed tank. Fricton losses in the
entire piping system are 30 J/kg. What pressure must
be developed? What is the power of the pump?
ID of 2 in pipe - 52.50mm
3-in pipe -
77.92 mm​

What precautions should you take to prevent injuries when dealing with heavy loads?

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false