Engineering, 13.04.2021 01:50 TravKeepIt100
A hypothetical metal alloy has a grain diameter of 1.7 102 mm. After a heat treatment at 450C for 250 min, the grain diameter has increased to 4.5 102 mm. Compute the time required for a specimen of this same material (i. e., d 0 1.7 102 mm) to achieve a grain diameter of 8.7 102 mm while being heated at 450C. Assume the n grain diameter exponent has a value of 2.1.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
A hypothetical metal alloy has a grain diameter of 1.7 102 mm. After a heat treatment at 450C for 25...
Questions
Mathematics, 03.08.2020 09:01
Mathematics, 03.08.2020 09:01
Mathematics, 03.08.2020 09:01
History, 03.08.2020 09:01
