Engineering, 01.05.2021 01:30 quynhnguyen7454

The following two DC motors are to be compared for certain application: Motor A: 250 V Shunt motor with 0.2 ohm armature resistance, 125 ohm field resistance, and has a full load operation with 50 armature Amps at 1000 rpm.
Motor B: 250 V Series motor with 0.2 ohm armature resistance, 0.1 ohm field resistance, and has a full load operation with 50 armature Amps at 1000 rpm

Required:
a. While running at full load, what will be the reduction in speed if the load torque is increased by
b. While running at full load, what will be the change in torque if the speed drops by 20%?
c. The added armature starting resistance to start the motor at 200% Of its rated armature current, and what is the corresponding starting torque?
d. What is the starting resistance cut and the motor speed, when the armature current becomes in order to bring the armature current back to the level to continue with its Starting?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

The following two DC motors are to be compared for certain application: Motor A: 250 V Shunt motor...

Questions