subject
Engineering, 01.07.2021 15:10 gabbypittman20

An open tank containing acetone at 20 oC is being pumped out through a 2 in inner diameter pipe and into a 1-in nozzle. The tank level is 4.5 ft above the pump. Calculate the pump power requirement to achieve a flow rate of 0.2 ft3/s. Assume a 45% pump efficiency

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
An open tank containing acetone at 20 oC is being pumped out through a 2 in inner diameter pipe and...
Questions
question
Mathematics, 25.05.2021 18:10
question
Mathematics, 25.05.2021 18:10
Questions on the website: 13722367