Engineering, 27.08.2021 22:40 luceridiaaz
A static test stand is to be designed for testing a diffuser of a jet engine. The following conditions are known for the test: 50 kg/s of air enter a diffuser at a velocity of 750m/s and static pressure of 20kPa. The air leaves the diffuser at a velocity of 90 m/s and static pressure of 330kPa. The entrance area of the diffuser is 0.25 m2 and the exit area is 0.28 m^3.
Required:
Determine the magnitude and direction of the strut force necessary to hold the diffuser stationary when this diffuser is operated in an atmospheric pressure of 20 kPa.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
A static test stand is to be designed for testing a diffuser of a jet engine. The following conditio...
Computers and Technology, 06.07.2019 21:00
Biology, 06.07.2019 21:00
Mathematics, 06.07.2019 21:00
History, 06.07.2019 21:00
English, 06.07.2019 21:00
Mathematics, 06.07.2019 21:00
Mathematics, 06.07.2019 21:00
Mathematics, 06.07.2019 21:00