Engineering, 23.11.2021 14:00 battlemarshmell
the 50mm diameter solid steel shaft in figure is simply supported at the ends. Two pulleys keyed to the shaft where pulley B is of diameter 200mm and pulley C is of diameter 300mm. considering the bending moment and torsional stress only, determine the location and the magnitude of the greatest tensile, compressive, and shear stress in the shaft if the torque produced at B and C IS 300Nm
Answers: 1
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
the 50mm diameter solid steel shaft in figure is simply supported at the ends. Two pulleys keyed to...
Chemistry, 12.02.2022 01:30
Mathematics, 12.02.2022 01:30
Biology, 12.02.2022 01:30
Physics, 12.02.2022 01:30
Mathematics, 12.02.2022 01:30
English, 12.02.2022 01:30
Mathematics, 12.02.2022 01:30
Mathematics, 12.02.2022 01:30
Biology, 12.02.2022 01:30
Mathematics, 12.02.2022 01:30
Chemistry, 12.02.2022 01:30
English, 12.02.2022 01:40