Mathematics, 04.08.2019 13:30 sabrinarasull1pe6s61

Simplify quantity 4 x squared plus 12 x minus 16 all over quantity 2x plus 10 over quantity 6 x plus 24 over quantity x squared plus 9x plus 20.

Answers: 1

Show answers

Another question on Mathematics

Mathematics, 21.06.2019 19:30

Select the margin of error that corresponds to the sample mean that corresponds to each population: a population mean of 25, a standard deviation of 2.5, and margin of error of 5%

Answers: 2

Answer

Mathematics, 21.06.2019 22:10

Write the function for the graph. (1.8) (0,4)

Answers: 3

Answer

Mathematics, 21.06.2019 23:00

Which of the following graphs could represent a cubic function?

Answers: 1

Answer

Mathematics, 21.06.2019 23:00

Which point has an coordinates of (2,0) ? a

Answers: 1

Answer

You know the right answer?

Simplify quantity 4 x squared plus 12 x minus 16 all over quantity 2x plus 10 over quantity 6 x plus...

Questions

Medicine, 13.09.2019 23:20

The anatomical division of the pharynx that is located behind the mouth from the soft palate above to the level of the hyoid bone below is called the:...

Chemistry, 13.09.2019 23:20

Alarge pot (10 kg) of beef stew is left out on the kitchen counter to cool. the rate of cooling, in kj/min, equals 1.955 (t-25), where t is the temper...

Chemistry, 13.09.2019 23:20

Conversion of mass to moles a continuous feed to a separation unit is 1,000 kg/h of 45 wt% methanol and 55 wt% water, whose molecular weights are 32 a...

Chemistry, 13.09.2019 23:20

Two containers initially contain dry air at 40°c. water is added to both containers so that the relative humidity is 30% in container #1, and 80% in c...

Chemistry, 13.09.2019 23:20

The enthalpy of vaporization of h2o at 1 atm and 100 c is 2259 kj/kg. the heat capacity of liquid water is 4.19 kj/kg-c, and the heat capacity of wate...

Chemistry, 13.09.2019 23:20

Calculate the cell potential for a cell operating with the following reaction at 25 degrees celsius, in which [mno4^1-] = .01m, [br^1-] = .01m, [mn^2+...

Chemistry, 13.09.2019 23:20

An aqueous solution of nazco3 saturates at 300 k to form, nazco3.3h2o crystals. 10 kg/h of 35 mass% aqueous solution enters a continuous evaporative c...

Chemistry, 13.09.2019 23:20

The halpy of vaporization of h2o at 1 atm and 100 c is 2259 kj/kg. the heat capacity of liquid water is 4.19 kj/kg. c, and the heat capacity of water...

Chemistry, 13.09.2019 23:20

Prepare benzoic acid from benzyl alcohol.5 ml of sodium hydroxide, water and potassium manganese are added. how could you tell when the reaction...

Mathematics, 13.09.2019 23:20

When given a graph, the vertical line test can be used to determine functionality. describe the vertical line test and explain the reasons why a graph...

Engineering, 13.09.2019 23:20

Two factors that can be modified to optimize the cutting processes are feed and depth, and cutting velocity. a) true b) false...

Engineering, 13.09.2019 23:20

The highest cutting temperature is located close to the shear zone. a) true b) false...

Engineering, 13.09.2019 23:20

The largest source of heat generated in metal cutting is due to friction. a) true b) false...

Engineering, 13.09.2019 23:20

Calculate the differential pressure in kpa across the hatch of a submarine 320m below the surface of the sea. assume the atmospheric pressure at the s...

Engineering, 13.09.2019 23:20

Increasing rake angle will decrease the tendency for built-up-edge to form. a) true b) false...

Engineering, 13.09.2019 23:20

An orthogonal cutting operation is performed using a rake angle of 15°, to=0.012 in and w=0.100 in. the chip thickness ratio is measured after the cut...

Engineering, 13.09.2019 23:20

Write the type of chips generated at each of the following cutting conditions, and explain why. a. low cutting speed: b. large depth of cut: c. very...

Engineering, 13.09.2019 23:20

How are the polymeric materials classified? give examples of the plastic materials and elastomers? give the difference between thermoplastics and t...

Engineering, 13.09.2019 23:20

What is components? what is phases? what is tie line?...

Engineering, 13.09.2019 23:20

Avariable speed reciprocating compressor of mass 400 kg has a natural frequency of 16.2 hz. (a) design an optimum auxiliary mass damper, so that the m...

More questions: Mathematics Another questions