subject
Physics, 21.08.2019 17:10 blakeboy3148

You have available a 550 w pump with 70% efficiency. is it possible to use this pump to transfer 10 m/h of a liquid through a 4.7 cm inside diameter pipe, from one open tank a to another tank b of higher level (altitude) with similar dimension or size, if the liquid is discharged at a point 10 m above the liquid level in the suction tank and the total friction losses are 50 jag? the density and the viscosity of the liquid are 1050 kg/m and 2 cp respectively. justify quantitatively. b) repeat the same question above. by using a 650 w pump with 80% efficiency, calculate the maximum height of the water that can reach in tank b. solve quantitatively.

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 10:30
Aperson gives a shopping cart an initial push along a horizontal floor to get it moving, and then lets go. the cart travels forward along the floor, gradually slowing as it moves. consider the horizontal force(s) on the cart while it is moving forward and slowing. which of the following statements is correct? (a) both a forward and a backward force are acting on the cart, but the forward force is larger. (b) only a forward force is acting which diminishes with time. (c) both a forward and a backward force are acting on the cart, but the backward force is larger. (d) only a backward force is acting, no forward force.
Answers: 3
question
Physics, 22.06.2019 15:10
When electrons are added to the outermost shell of a carbon atom, it forms--an anion that has a larger anion that has a smaller cation that has a larger cation that has a smaller radius.
Answers: 3
question
Physics, 22.06.2019 21:00
The first law of thermodynamics states that heat added to a system is neither created nor destroyed but is as it changes into other forms of energy.
Answers: 1
question
Physics, 22.06.2019 23:40
To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.
Answers: 2
You know the right answer?
You have available a 550 w pump with 70% efficiency. is it possible to use this pump to transfer 10...
Questions
question
Mathematics, 02.10.2019 05:00
question
Mathematics, 02.10.2019 05:00
Questions on the website: 13722360