Physics, 04.12.2019 03:31 ElizabethF

Que ventajas e inconvenientes tienen las energias renovables, el agua del mar, agua embalzada, el sol, el viento

Answers: 3

Show answers

Answers

Answer from: junielouwho

Ventajas ambientales:

La principal ventaja es la prácticamente es nula la emisión de gases de efecto invernadero (GEI).

* Ayudan a disminuir enfermedades relacionadas con la contaminación.

* No necesitan grandes cantidades de agua para su funcionamiento.

* No crean problemas de basura difíciles de resolver, como la eliminación de residuos nucleares o escorias.

Ventajas económicas:

*Generación de empleos directos (trabajadores de la construcción, desarrolladores, fabricantes de equipo, diseñadores, instaladores, financieros).

* Competencia y reducción de precios de las generadoras tradicionales por tener un nuevo competidor, que asegure confiabilidad del servicio.

ENERGÍA SOLAR INCONVENIENTES:

La instalación de paneles solares en casas o industrias no es barato, además no todas las vivienda pueden instalarse este tipo de paneles. La legislación en cuanto al uso de los paneles solares no es la misma en todo el mundo.

ENERGÍA EÓLICA INCONVENIENTES:

La creación de parques eólicos es muy cara, además hay colectivos que se opinen a la instalación de parques eólicos en tierra porque opinan que afea el paisaje y es peligrosos para las aves que chocan al volar cerca de las hélices de los generadores eólicos.

ENERGÍA DE LAS MAREAS INCONVENIENTES:

El movimiento de las mareas mueve las turbinas. El movimiento de las mareas es capaz de mover turbinas, pero para ello hay que construir represas o aluviones.

Entre los inconvenientes está que la construcción de aluviones es muy cara. Hay oposición de grupos ecologistas que destacan que esta energía puede tener un impacto negativo sobre la fauna acuática. La energía de las mareas puede reducir el flujo de las mareas e impedir el flujo de aguas residuales al mar.

Explanation:

Answer from: Quest

learn it on the intertant so you can solve

Answer from: Quest

It may possibly be c i think |-/

Another question on Physics

Physics, 21.06.2019 20:40

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Answers: 3

Answer

Physics, 22.06.2019 00:30

Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass

Answers: 1

Answer

Physics, 22.06.2019 08:20

A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?

Answers: 3

Answer

Physics, 22.06.2019 18:00

By what primary heat transfer mechanism does the sun warm the earth?

Answers: 1

Answer

You know the right answer?

Que ventajas e inconvenientes tienen las energias renovables, el agua del mar, agua embalzada, el so...

Questions