subject
Physics, 21.02.2020 01:56 JadaaJayy

How many electron groups are around the central iodine atom? Note: one "electron group" means one lone pair, one single bond, one double bond, or one triple bond.

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 19:30
Energy is the ability to do work which measures what
Answers: 3
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 10:00
How many times did thomas edison mess up the light bulb
Answers: 1
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
You know the right answer?
How many electron groups are around the central iodine atom? Note: one "electron group" means one lo...
Questions
question
English, 21.05.2021 22:00
question
Chemistry, 21.05.2021 22:00
question
Mathematics, 21.05.2021 22:00
question
Physics, 21.05.2021 22:00
question
Mathematics, 21.05.2021 22:00
Questions on the website: 13722367