Physics, 10.03.2020 09:30 pr47723

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being heat treated as it moves through a furnace at a speed of 1 cm/s. The air temperature in the furnace is maintained at 840°C with a convection heat transfer coefficient of 80 W/m2·K. If the furnace length is 3 m and the stainless steel strip enters it at 20°C, determine the surface temperature gradient of the strip at mid-length of the furnace. (Round the final answer to the nearest whole number.)

Answers: 1

Show answers

Answers

Answer from: hartmaaj95

1170 Kelvin/meter

Explanation:

See attached pictures.

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being he

Answer from: Basicwhitegirl1

The surface temperature gradient is given as 1170.137 K/m

Explanation:

In to obtain the surface temperature gradient we need to obtain the characteristics length and the formula for this is

$L_c = \frac{V}{A_s}$

Where V is the volume of the ball and A_s is the surface area of the particle

Now let assume a one-dimensional heat transfer and that width of the strip is negligible

Hence the surface area would be the two opposite surface of the strip which means that the volume is obtained by multiplying surface area and the thickness

Mathematically

V = A *L

and A_s =2A

Substituting this into the formula above

$L_c = \frac{(A*L)}{(2A)}$

$=\frac{L}{2}$

Note that L in this equation is the thickness of the plate and from the question it is equal to 5 mm

$L_c = \frac{5}{2} = 2.5 \ mm$

In order to obtain the temperature of the gradient of the strip we need to obtain the temperature of the strip at mid-length of the furnace

and the formula is

$e^{-bt} = \frac{T(t)-T_\infty }{T_i-T_\infty}$

Where $T_\infty$ is the ambient temperature = 900 °C

T_i is the initial temperature = 20 °C

is obtained with the formula

$b =\frac{hA_s}{\rho C_p V}$

replacing V with A_s * L_c

$b = \frac{hA_s}{\rho C_p L_c}$

$=\frac{h}{\rho C_p L_c}$

Where h is the heat transfer coefficient $\rho$ is the density , C_p is the specific heat at constant pressure and L_c is the characteristics length

Substituting

$80 \ W/m^2\cdot K \ for \ h \ 8000kg /m^3 \ for \ \rho , \ 570J/kg \ \cdot K \ for \ C_p \ and \\\\2.5mm \ for L_c$

$b = \frac{80}{y(8000)* 570 * [2.5 \ mm}\frac{10^{-3 }m}{1mm} ]}$

$=\frac{80} {8* 570* 2.5}$

$= 0.007017 \ s^{-1}$

t is the of the stainless-steel strip being heated and the formula is

$t = \frac{(I_f/2)}{v}$

Where I_f is the length of the furnace , and v is the speed

Substituting 3 m for I_f and 1 cm/s for v

$t =\frac{(3/2)}{[1 cm/s \ * \frac{10^{-2}m}{1cm} ]}$

$= \frac{1.5}{10^{-2}}$

= 150s

Substituting the obtained value into the formula for temperature of strip at mid-length of the furnace we have

$e^{(-0.007017 s^{-2})(150s)} = \frac{T(t)- 900}{20 - 900}$

$T(t) = 900 + (20-900) (e^{(0.007017)(150)})$

=592.839 °C

Now to obtain the surface temperature gradient of the strip at mid-length of the furnace we would apply this formula

$h = \frac{-k[\frac{\delta T}{\delta y} ]_{y=0}}{T(t)-T_{\infty}}$

=> $[\frac{\delta T}{\delta y} ]_{y=0}} =\frac{h}{k} (T(t) - T_{\infty})$

Where h is the convection heat transfer coefficient

Where $[\frac{\delta T}{\delta y} ]_{y=0}}$ is the surface temperature gradient of the strip at mid-length of the furnace

T(t) is the temperature of the strip at mid-length of the furnace , $T_{\infty}$ the ambient temperature and k is the thermal conductivity

$Substituting \ 80 \ W/m^2 \cdot K for h \ , \ 592.839 ^oC \ for \ T(t) \ , \ 900 ^o C\\for \ T_{\infty } \ and \ 21 W/m \ \cdot \ K \ for \ k$

$[\frac{\delta T}{\delta y} ]_{y=0}} =-\frac{80}{21} (592.839 -900)$

=1170.137 K/m

Answer from: Quest

technology is the application of the knowledge gained by science.

Answer from: Quest

Isso9

Another question on Physics

Physics, 21.06.2019 22:30

Select the word from the list that best fits the definition classification of most stars on the h-r diagram

Answers: 1

Answer

Physics, 22.06.2019 03:30

What makes thermal imaging cameras useful? they can detect differences in color. they can detect differences in wave speeds. they can detect differences in temperature. they can detect mechanical waves.

Answers: 1

Answer

Physics, 22.06.2019 11:00

Afisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. it takes a time of 2.20 s for the boat to travel from its highest point to its lowest, a total distance of 0.670 m . the fisherman sees that the wave crests are spaced a horizontal distance of 5.80 m apart. (a) how much is the wavelength? (b) find the period of the wave. (c) how fast are the waves traveling? (d) what is the amplitude a of each wave?

Answers: 3

Answer

Physics, 22.06.2019 12:00

The sun’s mass is 2.0×10^ 30 kg, its radius is 7.0×10 5 km, and it has a rotational period of approximately 28 days. if the sun should collapse into a white dwarf of radius 3.5×10 3 km, what would its period be if no mass were ejected and a sphere of uniform density can model the sun both before and after?

Answers: 3

Answer

You know the right answer?

A 5-mm-thick stainless steel strip (k = 21 W/m·K, rho = 8000 kg/m3, and cp = 570 J/kg·K) is being he...

Questions