Valtteri Bottas, a Formula One driver for Mercedes, is analyzing the forces on a 400 kg car driving at a constant velocity of 20 m/s. They draw the following
diagram:

Which of the following statements properly identifies what is wrong with their force
diagram?

A. The diagram shows a net force but there should not be a net force on the car.

B. There cannot be any forces on the car if it has a constant velocity so there
should be no arrows.

C. There should be more backward force on the car because the car is slowing
down.

D. The forward force should be 20 N rather than 8,000 N since F = ma.

Athin nonconducting rod with a uniform distribution of positive charge q is bent into a circle of radius r. the central perpendicular axis through the ring is a z-axis, with the origin at the center of the ring. a) what is the magnitude of the electric field due to the rod at z = 0? n/c (b) what is the magnitude of the electric field due to the rod at z = infinity? n/c (c) in terms of r, at what positive value of z is that magnitude maximum? r (d) if r = 4.00 cm and q = 9.00 µc, what is the maximum magnitude? n/c

Ahot-air balloon takes off from the ground traveling vertically with a constant upward acceleration of magnitude g/4. after time interval δt, a crew member releases a ballast sandbag from the basket attached to the balloon. how many seconds does it take the sandbag to reach the ground? (express your answer in terms of δt)

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0