How much KE does the car have if it weighs 450kg and moves at the speed of 23 m/s?

-The formula of to calculate  KE = 1/2 m v^2

so we,

           KE = 1/2 (450kg)(23m/s)^2

           KE = 1/2 ×238050

            KE = 119025

Explanation: In Physics Formulas mean everything.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

when two balls of the different masses are dropped from equal height, they reach the ground at the same time .this is because they experience the same acceleration.

the acceleration is independent of mass.

thus when they are dropped they will always maintain the same velocity and travel the same distance (neglect air resistance of course) at the same time.