subject
Physics, 27.01.2021 04:00 mackenziann

A 3g block rests on a rough horizontal table a rope attached to the block is pulled with a force of 11N to the left as a result the block accelerates at 3m/s

ansver
Answers: 1

Another question on Physics

question
Physics, 23.06.2019 02:50
You are your friend move a new refrigerator into his kitchen. you apply a horizontal force of 252 n in the negative x direction to try and move the 56 kg refrigerator. the coefficient of static friction is 0.61. (a) how much static frictional force does the floor exert on the refrigerator? give both magnitude (in n) and direction. magnitude n direction (b) what maximum force (in n) do you need to apply before the refrigerator starts to move?
Answers: 1
question
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
question
Physics, 23.06.2019 11:00
How did world cup soccer become cool?
Answers: 1
question
Physics, 23.06.2019 12:30
What is the prp when using 5 mhz acoustic waves through soft tissue, imaging a death of 20 cm?
Answers: 1
You know the right answer?
A 3g block rests on a rough horizontal table a rope attached to the block is pulled with a force of...
Questions
Questions on the website: 13722367