subject
Physics, 11.03.2021 06:30 elijiahman99

A RCL series circuit consists of a 1.50F capacitor, a 6.00 mH inductor, and a 71.0 Ωresistor that are connected across an AC voltage supply with maximum voltage of (max)=13.0V. What must be the frequency of the AC voltage supply for the average power delivered to the circuit to be (1/3)V(rms) I (rms)?, and Under the same conditions of the first part, what is the average power dissipated through the resistor?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:50
Calculate the heat capacity per object when the total energy is 4 quanta. (think of this in terms of increasing from 3.5 quanta of energy in the system to 4.5 quanta of energy in the system, if that were possible.) c4 = __ j/k/object
Answers: 2
question
Physics, 22.06.2019 00:00
During physical science, ms. greene challenged her students to produce an energy transformation. james and jill wrapped a 4-inch nail with a coil of fifty turns of wire. they connected one end of the coil to one terminal of a knife switch. they connected the other terminal of the knife switch to the battery. finally, they connected the end of the coil to the other terminal of the battery. james held the tip of a 1-inch nail near the flat end of the 4-inch nail. jill closed the knife switch quickly and then opened it. the 1-inch nail was pulled toward the 4-inch nail. what is the best explanation of why the nail moved? a) electrical energy was converted to mechanical energy in the 1-inch nail. b) the 4-inch nail became an electromagnet and the magnetic force attracted the 1-inch nail. c) the electric current in the 4-inch nail was converted to mechanical energy in the 1-inch nail. d) the 4-inch nail had a positive charge and the 1-inch nail had a negative charge. opposites attracted.
Answers: 1
question
Physics, 22.06.2019 02:30
The human body stores chemical energy from digested food. some of the chemical energy is converted into mechanical energy when the body moves. which statement best supported by this information
Answers: 3
question
Physics, 22.06.2019 18:10
A200-n force is applied to the foot-operated air pump. the return spring s exerts a 2.6-n·m moment on member oba for this position. determine the corresponding compression force c in the cylinder bd. if the diameter of the piston in the cylinder is 40 mm, estimate the air pressure generated for these conditions. state any assumptions. enter a positive number for the compression force c.
Answers: 2
You know the right answer?
A RCL series circuit consists of a 1.50F capacitor, a 6.00 mH inductor, and a 71.0 Ωresistor that ar...
Questions
question
Biology, 12.11.2020 17:40
question
Mathematics, 12.11.2020 17:40
Questions on the website: 13722361