The initial piezometric surface in a confined aquifer of 20-m thickness is 34 m above the bottom. After a long period of pumping, the observed head in the pumping well is 28.8 m. The well losses (head loss through the well) is 0.5 m. The hydraulic conductivity of the aquifer is 12.2 m/day. If the radius of the well is 0.5 m and the radius of influence of the pumping is 500 m, what is the steady-state well discharge

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

96.77 amp

explanation:

rl = 250/100 = 2.5 ohms.

egl = 250 + (100 × 0.1) + 2 = 262 v.

at 700 r.p.m., eg2 = 262 × 700/1000 = 183.4 v.

if ia is the new current, then eg2 - 2 - (ia × 0.1) = 2.5 ia

which means this will give ia = 96.77 amp.