Physics, 25.05.2021 16:40 dogeking12

A furnace wall consists of 25 cm firebrick, 30 cm insulating brick and 25 cm building brick , respectively. The inside wall is a temperature of 800C and the atmospheric temperature is 15 degrees * C C. Calculate the heat loss per of wall area and the temperatures of the interfaces of the furnace. The heat transfer coefficient for the outside surface is 10 W/m^ ^ 2.k and the thermal conductivities of the firebrick , insulating brick, and building brick are 6, 0.3 and 0.8W / m respectively. m^ ^ 2; tc=^ * 1 point t 1 =800^ C; t a iota c; t 2 =15^ o; 86.363 degrees * C 73.148°C 74.059 degrees * C; 68.983 degrees * C

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 00:00

Suppose that recording station n is located 200 km north of the epicenter of an earthquake, and recording station s is located 100 km south of the epicenter of the same earthquake. which of the following statements would be true?

Answers: 2

Answer

Physics, 22.06.2019 11:00

Aperson walks first at a constant speed of 4.89 m/s along a straight line from point a to point b and then back along the line from b to a at a constant speed of 2.95 m/s. what is the average speed over the entire trip?

Answers: 1

Answer

Physics, 22.06.2019 19:50

The heater element of a 120 v toaster is a 5.4 m length of nichrome wire, whose diameter is 0.48 mm. the resistivity of nichrome at the operating temperature of the toaster is 1.3 × 10-6 ω·m. the toaster is operated at a voltage of 120 v. (a) what is the power drawn by the toaster? (b) if the cost of electricity is 12 ¢ per kilowatt-hour, and it takes 2 minutes to toast bread, how much does it cost for toasted bread? (c) when the heater element is at room temperature, is the resistivity in the nichrome wire greater than, less than, or equal to it’s resistivity when at operating temperature? explain.

Answers: 3

Answer

Physics, 22.06.2019 21:40

Wo small variable-thrust jets are actuated to keep the spacecraft angular velocity about the z-axis constant at ? 0 = 1.16 rad/s as the two telescoping booms are extended from r1 = 1.18 m to r2 = 4.69 m at a constant rate over a period of 124 seconds. the small 19-kg experiment modules at the ends of the booms may be treated as particles, and the mass of the rigid booms is negligible. determine the necessary thrust t for each jet as a function of time where t = 0 is the time when the telescoping action is begun. after you have the general expression for t, answer the questions. show work.

Answers: 1

Answer

You know the right answer?

A furnace wall consists of 25 cm firebrick, 30 cm insulating brick and 25 cm building brick , respec...

Questions