subject
Physics, 01.09.2021 20:50 corbinfisher

Discuss with tangible examples supporting the hypothesis “Improving the Exergy may be as good, if not better than discovering new oil / coal mines”

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 01:30
For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.
Answers: 3
question
Physics, 22.06.2019 10:10
Henry, whose mass is 95 kg, stands on a bathroom scale in an elevator. the scale reads 830 n for the first 2.4 s after the elevator starts moving, then 930 n for the next 2.4 s. part a what is the elevator's speed 4.8 s after starting? express your answer with the appropriate units.
Answers: 2
question
Physics, 22.06.2019 11:00
A0.580-kg rock is tied to the end of a string and is swung in a circle with a radius of 0.500 meters. the velocity of the rock is 4.50 m/s. what is the centripetal force acting on the rock? 15.5 n 5.22 n 69.8 n 23.5 n
Answers: 1
question
Physics, 22.06.2019 11:20
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
You know the right answer?
Discuss with tangible examples supporting the hypothesis “Improving the Exergy may be as good, if no...
Questions
question
Mathematics, 15.12.2020 03:20
question
Social Studies, 15.12.2020 03:20
question
Health, 15.12.2020 03:20
question
Mathematics, 15.12.2020 03:20
question
Physics, 15.12.2020 03:20
Questions on the website: 13722362