Engineering, 06.04.2021 01:00 Raync8780
fc ’ = 5,000 psi; fy = 60,000 psi Unit weight of concrete = 150 lb/cu. ft. Determine the deflection due to a) Dead Load; b) Total Applied Load; and c) Live Load
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
fc ’ = 5,000 psi; fy = 60,000 psi Unit weight of concrete = 150 lb/cu. ft. Determine the deflection...
Mathematics, 05.07.2019 06:20
History, 05.07.2019 06:20
Mathematics, 05.07.2019 06:20
Mathematics, 05.07.2019 06:20